RunCam Hybrid 4K HD camera is for Pre-order now! The camera will arrive on about September 27th. First Come, First Reserved!
Runcam just release the 4K HD and FPV camera--Runcam Hybrid. With the 20x20MM mounting board, it is suitable for most of the fpv racing drones in the market. With the racing-level 6ms fpv latency and FOV 145°HD recording, Runcam hybrid will bring you to extrordinary FPV experience.
--FOV 145°HD Recording
--Racing-level 6ms FPV Latency
--20x20mm mounting board size, easy to install
--Remote-control HD recording
--QR code parameter setting
--Upgradeable inner FPV camera
Item Brand: Runcam
Item Model: Runcam Hybrid
HD sensor: SONY 8MP
Analog sensor: SONY 1.3MP
Field of View (FOV): HD Recording FOV 145°(FPV FOV 150° @ 4: 3)
Video Resolution: 4K@30fps / 2.7K@60fps / 2.7K@50fps / 1080P@120fps / 1080P@100fps / 1080P@60fps / 1080P@50fps
Video File Format: MP4
TV Mode: NTSC (720*480)/PAL (720*576) Switchable
Interface: HD supports UART remote control; FPV(Analog) supports UART fimrware update.
Max Micro SD Card Supported: Up to 128G. U3 recommended (2.7K60/1080P120 requires U3 or above; other solutions require U1 or above) Please make sure that the file format of the SD card is FAT32, otherwise, it will easily cause errors.
Mounting Holes Distance 20*20mm
PCB Size: 29*29mm
Lens Module Size: 19*25mm
Lens Specs: HD Lens : M10 FPV Lens : M8
Power Input: DC 5-20V (Non-direct power supply from 4s battery or above. Powered direcly with battery will generate surges and burn the camera.)
Working Current: 480mA @5V / 140mA @12V
Runcam Hybrid camera x 1
Plastic cover x 1
3pin FPV silicone cable (male) x 1
3pin FPV silicone cable (female) x 1
M2 Screws sets x 1