The Jumper R8 is a 2.4Ghz receiver that integrates MAVlink telemetry so you can show data from your Pixhawk/PX4 drone on your compatible radio like the Jumper T16, or Frsky Taranis.The jumper R8 receiver is the first receiver that can directly transmit the PIX and PX4 flight control data to your R/C controller. This can be used to display the flight control data directly on your radio. Apart from this is it just like any other 8 channel SBUS/PWM R/C receiver.
More channels: 1-8 channels from traditional channel output, 1-16 channels from SBUS port
RSSI output: analog voltage output (03.3V)
Two-way full duplex transmission (Telemetry)
Number of channels: 8ch (PWM) / 16ch (SBUS)
RSSI (Signal Strength Indication) output: PWM
Operating voltage range: 4.0~8.4V
Operating current range: 100mA@5V
Effective distance: full distance (>2.0km)
1. Press the bind button on the receiver, red/green LED solid on
2. On radio side, select Frsky D16 protocol (T12/T16: Multi Frsky D16);
3.When Red LED is flashing, binding succeeded.
4. After binding, withdraw the binding mode and power up the receiver again. Green Led turns solid on.
LED Colours and meaning:
the green light is always on: the signal is good.
the green light is blinking: the signal is bad.
the red light is always on: the signal is lost.