The Jumper R1 D16 receiver is compatible with all devices capable of using FrSky D16 mode. Ideal for mini-drones or models requiring an S.bus or S.port connection., with integrated redundancy, telemetry and smart port enable, and the IPEX connector makes it easier to replace the antenna.
Ideal for mini drones or models requiring an S.bus or S.port connection.
Brand name: Jumper
Item name: R1 Receiver
Channels: 16ch (SBUS)
RSSI (Signal Strength Indication) output: 0-3.3v
Data return: S.port
Operating voltage range: 4.0~6V
Operating current range: 80mA@5V
Effective distance: full distance (>1.5km)
Size: 20*15*4mm (without antenna)
Compatibility: D16 mode FrSky Taranis D16 Mode
Press and hold the receiver's bind button, turn on the power, the receiver will now enter binding mode. The red light is always on and the green light is flashing slowly.
Turn on the remote control and begin the bind procedure according to your radio. After the bind is successful the red light is off and the green light is always on.
1 x Jumper R1 Receiver