iFlight Nazgul5 V2 4S 6S FPV Drone LED Version Analog FPV Racing Drone BNF
iFlight Nazgul5 V2 4S 6S FPV Drone LED Version Analog FPV Racing Drone BNFiFlight Nazgul5 V2 4S 6S FPV Drone LED Version Analog FPV Racing Drone BNFiFlight Nazgul5 V2 4S 6S FPV Drone LED Version Analog FPV Racing Drone BNFiFlight Nazgul5 V2 4S 6S FPV Drone LED Version Analog FPV Racing Drone BNFiFlight Nazgul5 V2 4S 6S FPV Drone LED Version Analog FPV Racing Drone BNF

iFlight Nazgul5 V2 4S 6S FPV Drone LED Version Analog FPV Racing Drone BNF

Item# CA0444
USD $278.99
  • DESCRIPTION
  • REVIEWS
Version: 
4S(CA0444-4S)6S(CA0444-6S)
Receiver: 
NOFrsky receiver(+$18)TBS crossfire receiver(+$29)
QTY:
Nazgul5 V2 Analog is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Ratel, 2.1mm lens camera on it.
We sticked the lighter Caddx Ratel on one of our new updated XL5 V5 FPV frames.
Pre-tuned and setup, everything you need is just bind-and-fly!
Loads of power and smooth flights guaranteed using our popular XING motors with long-lasting NSK bearings.

Tips:
VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.

Features:
5mm arm design for more durability
Easy-Swap arms
LED illuminated Logo
XING 2207 motors with LED Light
5" version also fits 5.1" style propellers
Popular True-X configuration
TPU crash-guards
Fits both 30.5x and 20x stacks

Specification:
SucceX-E F7 45A flight stack
XING 2207 with LED Light FPV Motor (6S 1800KV / 4S 2750KV)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 399g (without battery)

FC // SucceX-E F7 Flight controller
MCU: STM32F22RET6 216 MHz
Gyro: MPU6000
Baro: BMP280(I2C)
OSD: IFLIGHT OSD (AT7456E)
BEC: 5V 2.5A
BlackBox: 8MB
Uart: 4*UART(UART1、UART2、UART4、UART5)
UART1 for VTX HD/Analog Telemetry
UART2 for Receiver
UART4 for GPS
UART5 for ESC Telemetry
4×Dshot/PWM outputs
Smartaudio & IRC Tramp VTX protocol supported
WS2812 led Strip: Yes
Bepper: Yes
Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
Weight: 6.9g

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC
Dimension: 36*43mm
Mounting Holes: 30.5*30.5mm/Φ3mm
Weight: 15g (without wire)
Supports 2-6S Lipo input
EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
Current sensor: YES
BEC: NO
Constant: 45A / Burst: 50A
Supports: DShot150/300/600/MultiShot/OneShot etc.
Target: G-H-30 BLS 16.7

VTX// SucceX Force 5.8g 800mW VTX Adjustable
The output power is stable;
Transmit power 4 gear switch: 25mW/200mW/400mW/800mW;
Output 48 frequency points,
Frequency lock fast, the boot does not interfere with companions;
Built-in output power self-check function;
Full format video format: NTSC /PAL;
Wide input voltage range. low power consumption:
7V~36V,+12V/380mA@800mW;
Small size:36*36*3mm
Mounting holes 4-M3
Lightweight: 7.2g(excluding antenna)

Specificaiton of VTX:
Item: SucceX-Force 800mW adjustable VTX
Input voltage:5V
Output voltage/ Max current: 5V 1A
12V input current: 40mA@PIT MODE, 95mA@25mW, 185mA@200mW,250mA@400mW, 380mA@800mW
Output 48 frequency points,
size:36*36*3mm
PIT/25mW/200mW/400mW/800mW

Battery Suggested Parts(not included):
6S 1550mAh XT60 Plug Battery
6S 1300mAh XT60 Plug Battery

Package Includes:
1x Nazgul5 V2 Analog Drone (pre-built and tested)
2 sets x Nazgul 5140 3-blades props(color may vary)
1x 20*200mm Battery Strap
1x 20*250mm Battery Strap