Website update notification: New changes live now!

Holybro  |  SKU: NA0181-12027

Holybro UBLOX M9N GPS for PIXHAWK PX4 PIX32 Flight Controller

$74.99

Connector Type

Description

The M9N GPS has an UBLOX M9N module, IST8310 compass, tri-colored LED indicator, and a safety switch. There are 3 different connectors options for different purposes.
This module ships with a baud rate of 115200 5Hz

Features and Specifications:  

  Holybro M10 GPS Holybro M9N GPS
GNSS Receiver Ublox M10 Ublox M9N
Number of Concurrent GNSS Up to 4 GNSS Up to 4 GNSS
BeiDou BeiDou
Galileo Galileo
GLONASS GLONASS
GPS GPS
QZSS QZSS
Frequency Band GPS L1 GPS L1
Galileo E1 Galileo E1
GLONASS L1 GLONASS L1
BeiDou B1 BeiDou B1
SBAS L1 SBAS L1
QZSS L1 QZSS L1
Compass IST8310 IST8310
Output Protocol UBX (U-blox) UBX (U-blox)
NMEA NMEA
Accuracy 2.0m CEP 1.5m CEP
Nav. Update Rate  Up to 25 Hz (single GNSS), Up to 25 Hz (4 concerrent GNSS)
Up to 10 Hz (4 concurrent GNSS)
GNSS Augmentation System EGNOS, GAGAN, MSAS and WAAS EGNOS, GAGAN, MSAS and WAAS
QZSS: L1S QZSS: L1S 
Default Baud Rate 115200 115200
Input Voltage  4.7-5.2V 4.7-5.2V
Port Type JST-GH-10P JST-GH-10P
Antenna 25 x 25 x 4 mm ceramic patch antenna 25 x 25 x 4 mm ceramic patch antenna
Power consumption Less than 200mA @ 5V Less than 200mA @ 5V
Operating Temperature -40~80C -40~80C
Dimension φ50 x14.4 mm φ50 x14.4 mm
Weight 32g  32g 
Cable Length 26cm (42cm cable purchase separately) 26cm (42cm cable purchase separately)
Other Tri-color LED Tri-color LED
Onboard Buzzer Onboard Buzzer
Safety Switch Safety Switch
LNA MAX2659ELT+ RF Amplifier LNA MAX2659ELT+ RF Amplifier
Rechargeable Farah capacitance Rechargeable Farah capacitance
Low noise 3.3V regulator Low noise 3.3V regulator

Ardupilot User: If unable to preform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.


The Holybro M9N GPS comes with 3 version connectors, suitable for different situations. You can choose the proper one according to your own needs. 

Holybro M9N GPS (JST GHR1.25mm 10 pin cable)--NA0181-12027
This JST GH 10Pin connector can be used on Pixhawk series 10pin "GPS module" or "GPS1" input port.
Holybro M9N GPS for Pix32(Molex1. 25mm 6pin & 4pin & 3pin cable)--NA0181-12028
These Molex1 25mm 6pin & 4pin &3pin connectors are for Pix32 "Switch", "GPS",and "I2C" input ports.
Holybro M9N 2nd GPS (JST GHR1 .25m 6pin cable)--NA0181-12029
This JST GH 6Pin connector can be used on Pixhawk Series 6pin"UART & I2C"or GPS2" input port as secondary GPS.
Dimensions:
Package Included:
M9N GPS Module *1
‘X’ type folding pedestal mount *1
Carbon rod 70mm & 140mm *1
 
Holybro

Holybro UBLOX M9N GPS for PIXHAWK PX4 PIX32 Flight Controller

$74.99
The M9N GPS has an UBLOX M9N module, IST8310 compass, tri-colored LED indicator, and a safety switch. There are 3 different connectors options for different purposes.
This module ships with a baud rate of 115200 5Hz

Features and Specifications:  

  Holybro M10 GPS Holybro M9N GPS
GNSS Receiver Ublox M10 Ublox M9N
Number of Concurrent GNSS Up to 4 GNSS Up to 4 GNSS
BeiDou BeiDou
Galileo Galileo
GLONASS GLONASS
GPS GPS
QZSS QZSS
Frequency Band GPS L1 GPS L1
Galileo E1 Galileo E1
GLONASS L1 GLONASS L1
BeiDou B1 BeiDou B1
SBAS L1 SBAS L1
QZSS L1 QZSS L1
Compass IST8310 IST8310
Output Protocol UBX (U-blox) UBX (U-blox)
NMEA NMEA
Accuracy 2.0m CEP 1.5m CEP
Nav. Update Rate  Up to 25 Hz (single GNSS), Up to 25 Hz (4 concerrent GNSS)
Up to 10 Hz (4 concurrent GNSS)
GNSS Augmentation System EGNOS, GAGAN, MSAS and WAAS EGNOS, GAGAN, MSAS and WAAS
QZSS: L1S QZSS: L1S 
Default Baud Rate 115200 115200
Input Voltage  4.7-5.2V 4.7-5.2V
Port Type JST-GH-10P JST-GH-10P
Antenna 25 x 25 x 4 mm ceramic patch antenna 25 x 25 x 4 mm ceramic patch antenna
Power consumption Less than 200mA @ 5V Less than 200mA @ 5V
Operating Temperature -40~80C -40~80C
Dimension φ50 x14.4 mm φ50 x14.4 mm
Weight 32g  32g 
Cable Length 26cm (42cm cable purchase separately) 26cm (42cm cable purchase separately)
Other Tri-color LED Tri-color LED
Onboard Buzzer Onboard Buzzer
Safety Switch Safety Switch
LNA MAX2659ELT+ RF Amplifier LNA MAX2659ELT+ RF Amplifier
Rechargeable Farah capacitance Rechargeable Farah capacitance
Low noise 3.3V regulator Low noise 3.3V regulator

Ardupilot User: If unable to preform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.


The Holybro M9N GPS comes with 3 version connectors, suitable for different situations. You can choose the proper one according to your own needs. 

Holybro M9N GPS (JST GHR1.25mm 10 pin cable)--NA0181-12027
This JST GH 10Pin connector can be used on Pixhawk series 10pin "GPS module" or "GPS1" input port.
Holybro M9N GPS for Pix32(Molex1. 25mm 6pin & 4pin & 3pin cable)--NA0181-12028
These Molex1 25mm 6pin & 4pin &3pin connectors are for Pix32 "Switch", "GPS",and "I2C" input ports.
Holybro M9N 2nd GPS (JST GHR1 .25m 6pin cable)--NA0181-12029
This JST GH 6Pin connector can be used on Pixhawk Series 6pin"UART & I2C"or GPS2" input port as secondary GPS.
Dimensions:
Package Included:
M9N GPS Module *1
‘X’ type folding pedestal mount *1
Carbon rod 70mm & 140mm *1
 

Connector Type

  • Standard
  • Secondary GPS
  • For Pix32 & Pixhawk1/2.4.6/2.4.8
View product